Machining
Machining fluids
Cutting, pressing, shaping
General lubrication
Degreasing, cleaning, protection, fountains
Greases & pastes
Pharmaceutical and cosmetics industries
Showing all 27 results
-
3,5Lubricity and extreme pressure properties. Finishing and superfinishing operations, grinding.
-
4Lubricity, polarity, low odour, usable in winter. Woodworking: lubricating saw blades and worktops.
-
-
22No sulfur or chlorine. Lubricity and anti-misting properties. Machining non-ferrous metals (brass, copper alloys).
-
12Anti-wear and heat evacuation properties. Particularly tailored to straightening operations.
-
36A neat oil aimed at band sawing. Its high fluidity, combined with a specific formulation, make it suitable for use in a ...
-
45A neat oil aimed at band sawing. Its high fluidity, combined with a specific formulation, enables it to be used in a ...
-
10, 15, 22, 46, 5No chlorine or active sulfur. Excellent lubricity. Versatile. Used for working ferrous and non-ferrous metals.
-
9Fluidity, light colour, low odour. Anti-misting properties, low volatility. Compatibility with yellow metals and non-ferrous ...
-
-
35Lubricity, polarity, thermal stability. Sawing, cutting, drilling, tapping with micro-spraying.
-
32Extreme pressure with no chlorine. Anti-wear and lubricity. Versatile. Ferrous metalworking.
-
10Light colour, low odour. Lubricity and extreme pressure. Compatibility with non-ferrous metals. Bar turning, threading, ...
-
13Extreme pressure with no chlorine, polarity, lubricity, cooling capacity. Machining on ferrous metals, difficult jobs on ...
-
16Extreme pressure with no chlorine, anti-wear, polarity, enhanced lubricity. Bar turning on stainless steels, hard steels, ...
-
22Lubricity and extreme pressure with no chlorine. Bar turning on stainless steels, high-speed broaching, deep-hole drilling ...
-
22Light colour, low odour. Lubricity and extreme pressure. Compatibility with non-ferrous metals. Bar turning, threading, ...
-
32Light colour, low odour. Lubricity and extreme pressure. Compatibility with non-ferrous metals. Bar turning, threading, ...
-
68Extreme pressure with no chlorine. Compatibility with yellow metals. Cutting and deformation, cold heading, greasing and ...
-
9Sulfo-chlorinated compound oil (EP), reduces friction coefficients. Difficult machining and cold heading on steel, brass, ...
-
22, 22Extra-extreme pressure with no chlorine, synthetic. Low volatility, high flash point (safety). Deep-hole drilling, roller ...
-
1700, 1700Extreme pressure properties, chlorine-free fluid. Difficult machining on hard steels, including stainless steels. ...
-
22Lubricity, improved surface finishes. Low-volatility, safe (ester-based). Particularly suitable for yellow metals. Milling, ...
-
20Extreme pressure. Viscosity tailored to fine jobs. Drilling - tapping. Fine jobs on hard materials.
-
150Extreme pressure. Adhesiveness and lubricity. Drilling - tapping. Very difficult jobs on refractory steels.
-
400Extreme pressure with no chlorine. Adhesiveness and lubricity. Drilling - tapping. Very difficult jobs on refractory steels.
-
100, 150, 32, 46, 68Multi-purpose cutting and greasing (hydraulics, slides, reduction gears). Extreme pressure with no chlorine. Anti-wear and ...
Available in a wide range of viscosities (from 2 to 1,700 mm²/s) and delivering different levels of extreme performance depending on the requirements, the OIL CUT series A to D range comprises more than 40 different products to ensure that you can select the right product for your application: bar turning, lathe work, milling, gear cutting, broaching, drilling/tapping, high-speed machining… specific products for micro-spraying, biodegradable products, multi-purpose products (cutting and greasing).
OIL CUT series E products are formulated from synthetic ester bases which offer numerous advantages in terms of performance and comfort in use: polarity, lubricity (reduction in consumption), very low volatility (reduction in oil vapours and mists), high flash point (safety).